Pool Build & Installation

We will initially confirm the finish floor level for your home or commercial indoor swimming pool.
We will use this as our datum in conjunction with construction drawings to set out swimming pool dimensions.

Once the exact size and positioning requirements have been confirmed, your contractor will excavate the feature space in preparation for your swimming pool build.

Our team will build a temporary shutter system from plywood, which will form four insulating walls for the pool walls and floor.

Then we’ll create a steel-reinforced cage based on structural design calculations for your pool. The shutter system provides structural reinforcement for the pool shell.

From project start to completion, the build and construction of your swimming pool shell will take between 2 and 5 weeks, depending on the dimensions and complexity of pool design.

Once the shell is completed, we’ll leave it to cure for a minimum of 4 weeks.

While the shell is curing, we’ll install pipework from the pool to the plant room.

Once the pool is cured, the holes for the fittings are drilled through the concrete shell. This gives the specified fittings and light niches the most secure water tight fitting. These can include:

• Pipe fittings
• Sumps
• Vacuum fittings
• Skimmers
• Return water inlets
• Advanced filtration systems
• Colour changing LED lighting

The next stage of the swimming pool build is to waterproof the steel re-inforced shotcrete pool shell.

A waterproofing membrane consisting of a tough synthetic HDPE sheet, with an adhesive side covered by a pressure-sensitive protective coating; when it comes into contact with concrete, it guarantees a tough, strong bond with the placed concrete itself (fully bonded). This composition guarantees that, when the sheet comes into contact with the placed concrete, the membrane forms a tough bond with the placed concrete.

Finally, a waterproof tanking coating system is applied prior to fixing ceramic tiles using an appropriate adhesive. Guaranteeing a 10 Year Structural Guarantee to BS EN 1992-1-1.

Upon completion of a drop test (filling the pool to check for leaks), the pool will be given time to dry before finishing with final fittings and tiling.

Your luxury swimming pool will then be tiled to your tile design choice of material, color and pattern. We work with the best tile manufacturers in the world to provide you with an extensive range of options for your pool. From classic blue mosaic tiles, porcelain, glass and stone tiles, as well as bespoke creations and heritage collections.

We can even apply your bespoke personal design to make your luxury swimming pool unique to you.

While your pool shell is being tiled, we’ll begin the primary phase of your heating and ventilation system. It’s important to regulate air temperature and humidity in your indoor pool space. That’s why we carry out HAVC work, ensuring that the air is healthy and recirculated correctly.

Ventilation and heating systems involve the installation of ductwork. Depending on the pool design, it will be in the ceiling void, under the floor or even both.

To ensure you are swimming in drinking water our state of the art filtration systems, pumps, dosing equipment and inter-connecting pipework are installed to give crystal clear water.

Your luxury swimming pool build project is finished by filling the pool with our drinking water quality pool water.

We use Dryden Aqua integrated water systems to remove toxic chlorine by-products and ensure that your pool water is consistently clean for the perfect swimming environment.